Refrigerant type: R134a
Power supply: 220V 50HZ
System maxi. pressure drop:0.025Mpa
Evaporator type: aluminum alloy plate
Internal filter: PF/AO/AA/AX
Fumigation Wooden Case package
HHL series compressed air refrigerated dryer armored design, simple and stylish appearance, combined with pipeline air filter, all filters are aluminum alloy die-casting, imported filter element material, EU authority testing, ensuring high efficient filtering. Only need to be connected to the air compressor to use, no need for cumbersome piping and save labor costs.
The refrigerated air dryer adopts aluminum alloy plate heat exchanger, environmentally friendly refrigerant and microcomputer automatic control, which can visually display the dew point temperature of the dryer; it has multiple protections of temperature and pressure. And inside air dryer installed four pieces of high efficiency compressed air filters with an electronic condensate drain, when install and maintain, it is much more convenient.
1.Help users save space when there is not enough installation space.
2.The air dryer and air filter are designed in integrated way, saving time and labor costs.
3.The design of aluminum alloy three-in-one heat exchanger minimizes the process loss of cooling capacity and improves the recycling of cooling. And under the same process capacity, the total input power will be reduced by 15~30%.
4.The integrated heat exchanger incorporates a flow-guiding fin, which uniform heat exchange of compressed air inside; furthermore, built-in gas-water separator will improves separation rate to protect air dryer has a better life time.
5.Multichannel temperature and pressure control, real-time display of dew point temperature, automatic recording of accumulated running time, self-diagnosis function, display corresponding alarm code, and automatic protection of equipment.
6. In response to the National Montreal Protocol, the series adopts R134a and R410a and R407c environmentally friendly refrigerants, which have zero damage to the atmosphere.
7.Standard constant pressure expansion valve and intelligent temperature control, we are doing laboratory test under the intake air temperature reaches 65 ° C, the ambient temperature reaches 42 ° C, the whole air dryer is still stable operation.
Also for this series designed with temperature and pressure double antifreeze protection, and when the engine is operated for a long time low load, the output of the compressor is automatically stopped, and the amount of cooling stored by the aluminum plate exchanger will be supplied to heat exchange. Extend the life of the equipment while saving energy.
The following products are suitable for use at 220V 50HZ & 380V 50HZ voltage, other voltages can be customize:
|Model||Flow Rate (m³/min)||Power Supply||Input Power (kw)||Air line Connection||Refrigerant Type||Internal Filter (PF/AO/AA/AX)||G.W.(kg)||Measurement (mm)|
|HHL030||3.6||220V 50Hz||0.73||RC 1"||R410a||DT016||98||950*610*885|
|HHL060||6.5||220V 50Hz||1.26||RC 1-1/2"||R410a||DT019||130||1200*560*1070|
|HHL080||8.5||220V 50Hz||1.87||RC 2"||R410a||DT020||160||1400*610*1200|
|HHL100||11.0||220V 50Hz||2.43||RC 2"||R410a||DT020||163||1400*610*1200|
|HHL120||13.5||220V 50Hz||2.63||RC 2"||R410a||DT020||186||1450*610*1200|
|HHL150||17.0||380v 50Hz||3.00||DN50 Flange||R407c||DT021||210||1800*850*1286|
|HHL200||23.0||380v 50Hz||3.70||DN65 Flange||R407c||DT022||240||2000*900*1403|
Working conditions & technical requirements
Rated ambient temperature: 38 ° C, max.42 ° C.
Rated inlet temperature: 38 ° C, max. 65 ° C.
Rated air pressure: 0.7Mpa, max. 1.6Mpa.
Pressure dew point under rated conditions: 2 ° C ~ 10 ° C (atmospheric dew point: -23 ° C ~-17 ° C).
Assembly environment: no sun, no rain, and good ventilation, installed in a horizontal hard foundation, no obvious dust and flying flour.