English
 |
Color: Red
Refrigerant type: R410a
Power supply: 380V 50HZ
Cooling Type: Air cooling
System maxi. pressure drop:0.025Mpa
Evaporator type: aluminum plate
Fumigation Wooden Case package
| Quantity: | |
|---|---|
HL100 Flow Rate 11m³/min RC2" Evaporator Aluminum R420a Danfoss Air Compresspr Refrigerated Air Compressed Dryer
Refrigerant type: R407ca
Power supply: 380V 50HZ
System maxi. pressure drop:0.025Mpa
Evaporator type: aluminum alloy plate
Air compressor: LG/Panasonic/Danfoss
Expansion valve: Danfoss
Filter Drier: Eco
Energy-saving: The design of aluminum alloy three-in-one heat exchanger minimizes the process loss of cooling capacity and improves the recycling of cooling capacity. Under the same processing capacity, the total input power of this model is reduced by 15~30%.
Efficient: The integrated heat exchanger incorporates a flow guiding fin to make the compressed air exchange heat evenly inside. It is oil-free, water-free and dust-free. The built-in gas-water separation device is equipped with a stainless steel filter to make the water separation more completely.
Intelligent: Multichannel temperature and pressure monitoring, real-time display of dew point temperature, automatic recording of accumulated running time, self-diagnosis function, display corresponding alarm code, and automatic protection of equipment.
Environmental protection: In response to the international Montreal agreement, all models in this series use R134a and R410a environmentally friendly refrigerants, which have zero damage to the atmosphere and adapt to the needs of the international market.
Stable: standard constant pressure expansion valve, standard intelligent temperature control, laboratory test, when the intake air temperature reaches 65 ° C, the ambient temperature reaches 42 ° C, it is still stable operation, with temperature and pressure double antifreeze protection, and When the engine is operated for a long period of time, the output of the compressor is automatically stopped, and the amount of cooling stored by the aluminum plate is exchanged to provide heat exchange. Extend the life of the equipment while saving energy.
Technical Specification
The following products are suitable for use at 220V 50HZ & 380V 50HZ voltage, other voltages can be customize:
| Model | Flow Rate (m³/min) | Power Supply | Input Power (kw) | Air line Connection | Refrigerant Type | G.W.(kg) | Measurement(mm) |
| HL010 | 1.2 | 220V 50Hz | 0.37 | RC3/4" | R134a | 34 | 480*380*665 |
| HL020 | 2.4 | 220V 50Hz | 0.52 | RC3/4" | R134a | 42 | 520*410*725 |
| HL030 | 3.6 | 220V 50Hz | 0.73 | RC 1" | R410a | 50 | 580*460*785 |
| HL060 | 6.5 | 220V 50Hz | 1.26 | RC 1 1/2" | R410a | 63 | 700*540*910 |
| HL080 | 8.5 | 220V 50Hz | 1.87 | RC 2" | R410a | 73 | 770*590*990 |
| HL100 | 11.0 | 220V 50Hz | 2.43 | RC 2" | R410a | 85 | 770*590*990 |
| HL120 | 13.5 | 220V 50Hz | 2.63 | RC 2" | R410a | 94 | 800*610*1030 |
| HL150 | 17.0 | 380v 50Hz | 3.00 | DN50 Flange | R407c | 180 | 1000*850*1143 |
| HL200 | 23.0 | 380v 50Hz | 3.70 | DN65 Flange | R407c | 210 | 1100*900*1203 |
| HL250 | 27.0 | 380v 50Hz | 5.80 | DN80 Flange | R407c | 350 | 1200*950*1273 |
| HL300 | 33.0 | 380v 50Hz | 6.10 | DN80 Flange | R407c | 420 | 1450*1000*1350 |
| HL400 | 42.0 | 380v 50Hz | 8.00 | DN100 Flange | R407c | 550 | 1550*1100*1403 |
| HL500 | 55.0 | 380v 50Hz | 9.20 | DN100 Flange | R407c | 680 | 1680*1300*1600 |
| HL600 | 65.0 | 380v 50Hz | 10.10 | DN100 Flange | R407c | 780 | 1750*1450*1680 |
| HL800 | 85.0 | 380v 50Hz | 12.00 | DN125 Flange | R407c | 920 | 1950*1500*1900 |
Working conditions & technical requirements
Rated ambient temperature: 38 ° C, max.42 ° C.
Rated inlet temperature: 38 ° C, max. 65 ° C.
Rated air pressure: 0.7Mpa, max. 1.6Mpa.
Pressure dew point under rated conditions: 2 ° C ~ 10 ° C (atmospheric dew point: -23 ° C ~-17 ° C).
Assembly environment: no sun, no rain, and good ventilation, installed in a horizontal hard foundation, no obvious dust and flying flour.
