LFA060 High Filtration 0.01μm Grade Alternative Air Compressor Filter Element
|As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible||High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³(21℃），1ppm(w).||High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21℃),0.01ppm(w)||Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21℃),0.001ppm(w)||Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21℃)，0.003ppm（w）||Dust particles whose diameter more than 1μm can be removed||Dust particles whose diameter more than 0.01μm can be removed|
1.PA+GF top cap material, resisting general acid and chemical corrosion
2.With Needle Felt Cloth Sodium Borosilicate Fiber Glass
3.Double Stainless steel support cylinder end cap
4.Element filtration down to 0.01micron.
5.Serve Life 6000-8000 hours
1,FPM series ring blocks the air before and after filtering to achieve a better filtering effect.
2,The supporting cylinder adopts stainless steel to ensure the filter element strength and the layered filtration design guarantees the filtering precision of filter element.
3,96% porosity have strong capacity of holding dusts, serve life up 6000-8000 hours.
4,The cover is made of PA+GF, free from deformation at 1.8mpa pressure and high temperature of 240℃ and capable of resisting general acid and alkali chemical corrosion and withstanding the severe compressed air environment. And with extremely strong hydrophobic and oilphobic.
5,The inside and outside support network is made of stainless steel to ensure the filter element strength, protect the glass fiber in production process, prevent the damage to filter element due to material rusting and avoid the damage to filter element due material rusting and avoid the secondary pollution of compressed air.
6,Special material for the outer layer of the filter element can aggregate the water and oil, therefore prevent the oil or water from being blown away and achieve the better drying and filtering effect.
Maintaining Air Quality
To maintain used air clear, dry and reliable, YUKA ask operators must replace elements with Original every year. During the using process, the filter element is constantly under bombardment from oily, acidic and high velocity dirt particles, and filter element which have to remove and retain to protect compressed air system. Over time, this can weaken the filter media and reduce filtration performance. This potential but critical reduction in filtration performance can not be detected by simple differential pressure monitoring techniques. So annual filter element changes are essential and failure to replace every year could result in reduced production performance, degrading air quality and increased operational costs.