Color: Light Blue
Maxi. Pressure : 16 bar
Operate Temperature: 1.5~80℃
Material: Grade A Aluminum Alloy
Filter element grade: PF/AO/AA/AX/ACS/AR/AAR
Corrosion Treatment : Inside and outsize the housing
100% air tightness test
Housing serve life: 15 years
Element server life: 6000~8000 hours
Filtration Efficiency: 99.99%
YFB090 RC2" 10.0m³/m Maxi. Pressure 1.6Mpa
Recommended for general automation equipment ,pneumatic tools, print, laser cutting industries.
7 Grade Filter Element： PF/AO/AA/AX/ACS/AR/AAR
Color: Light Blue
Min order: 20pcs
HV fiber glass
Aluminium alloy die-casting filter housing
Stainless steel filtering material support
7 filtration grades: PF,AO,AA,AX,ACS,AR,AAR
Flow rate: 1.0-48m³/min
Maximum operating pressure: 16 bar(g)
Maximum operating temperature: 80 °C
Supply OEM and ODM service
Coalescing Filters are probably the most important items of purification requirements in a compressed air system,
which are designed not only to filter oil vapor and water, but also to filter solid particulates to an acceptable level as
small as 0.01micron in size. Usually, in the installation system, the first filter's purpose is to pre-filter, protect the high
efficiency filters from bulk contamination so as to provide high quality compressed air. If the air filters worked under damp or full of water adsorption condition, it would prevent the compressed air from getting through the filter
element and the air low would force the liquid to get through from the pores of the element media. thus increase
working pressure drop and reduce filtration performance.
Activated Carbon Filters
Oil vapor can easily get through the coalescing filters in a state of gaseous, so the adsorptive filter must provide
large activated carbon adsorption bed. Because the damp air will reduce the adsorptive ability of the activated
carbon, the adsorptive filter usually installed after the adsorptive dryer, in order to guarantee effective removal of oil vapor and peculiar odor. it's not used to remove the liquid oil or aerosols, thus poor maintenance and lack of pre-filter will accelerate its invalidation.
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors.
|Model||Pipe size||Flow rates||Qty. (pcs)||Dimension (mm)|
|Technical requirements||Maximum operating pressure: 16 barg Maximum operating temperature: 80°C Minimum operating temperature:1.5°C|