Home> Products> Compressed Air Filter> Aluminum Air Filter> Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter
Quality Pneumatics Filter Air dryer Filter

Quality Pneumatics Filter Air dryer Filter

$53.1810-49 Piece/Pieces

$50.55≥50Piece/Pieces

Payment Type:T/T
Incoterm:EXW
Transportation:Ocean,Land,Air,Express
Port:Shenzhen,GUANGZHOU,SHANGHAI
Product Attributes

Model No.YD-B058

MaterialAluminum Alloy

Housing Serve Lige15 Years

Element Serve Life6000~8000 Hours

Filtration PerformanceFrom 5 μm To 0.01μm

Maxi. Operate Pressure1.6mpa

Operate Temperature1.5~80ºc

Flow Rate2.8m³/Min

Resistance CorrosionInside And Outside

PartsDp Indicator, Auto Drain, Sight Glass

Diversion Fin Design On Element Top CapLess Pressure Loss

O-Ring MaterialFluororubber

ColorBlue

OEM & ODM ServiceYes

TrademarkYuka

Transport PackageBrown Inner Box & Cardboard

SpecificationDimension: 120 X 110 X 349mm

OriginChina

HS Code8421399090

ClapboardWithout Clapboard

Filter Number1

Medium MaterialFiberglass

EfficiencyF5

Filtration GradeMedium Filter

TypeCartridge Filter

Packaging & Delivery
Selling Units : Piece/Pieces
Package Type : CARTON BOX
Picture Example :
Product Description

The working principle of Compressed Air Filter:

Gravity effect: When the air velocity in the filter is low, most of the oil droplets with a diameter of 20-50um are collected by free fall by gravity before reaching the filter layer. Moreover, the airflow continues to fall and collect as it flows through the filter. The greater the air velocity, the lower its efficiency.

 

Inertial impaction: Generally, suspended particles with a diameter greater than 1um have a large impulse. It is not always consistent with the air flow path, so it will inertially hit the fiber layer. The greater the air velocity, the greater the collision rate.

 

Direct interception: particles with a diameter of 0.3-1um move with the airflow, and most of them will be intercepted and separated by the fiber layer at 1/2 of the Filter Element. The smaller the particle, the lower the interception rate.

 

Penetration: particles with a diameter of less than 0.3um. Because the mass is too small to have the versatility of liquids, they move in an irregular Brownian motion. It is inconsistent with the air flow path, and it is precisely because of this movement that it can be captured by a finer filter layer. The smaller the particles. The more intense the Brownian motion, the greater the chance of catching it.


FILTER ELEMENT GRADES
PF AO AA AX ACS AR AAR
As a primary filter, particles whose diameter more than 5μm can be remove,the maxi. residual oil content is negligible High efficiency general protection, dust particles, water mist & oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³ (21ºC),1ppm(w). High effiency oil remove filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC),0.01ppm(w) Ultra-efficient filtration, dust particles, water mist&oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC),0.001ppm(w) Dust particles whose diameter more than 0.01μm, oil vapor &odor can be removed, the maxi. resident content of oil vapor does not exceed 0.003mg/m³(21ºC),0.003ppm(w) Dust particles whose diameter more than 1μm can be removed Dust particles whose diameter more than 0.01μm can be removed

                                                                             
TECHNICAL SPECIFICATION
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g).
For application in other working pressure, please refer to the correction factors. 


Model Pipe Size Max Flow rates Dimension(mm)
L/S m³/min cfm W (Width) D    (Diameter) H      (Height) A B C(clearance for housing)
YD-B017 RC1/2" 16.7  1.0  35.3  89 79 239 40 197 182
YD-B025 RC3/4" 25.0  1.5  53.0  89 79 239 40 197 182
YD-B030 RC1/2" 30.0  1.8  63.6  89 79 273 40 232 217
YD-B035 RC3/4" 33.3  2.0  70.6  89 79 273 40 232 217
YD-B058 RC3/4" 46.7  2.8  98.9  120 110 349 55 290 264
YD-B068 RC1" 60.0  3.6  127.1  120 110 369 55 310 264
YD-B080 RC1" 80.0  4.8  169.5  120 110 468 55 410 357
YD-B145 RC1-1/2" 120.0  7.2  254.2  120 110 468 55 410 357
YD-B220 RC2" 200.0  12.0  423.7  162 151 593 64 526 485
YD-B260 RC2-1/2" 233.3  14.0  494.4  162 151 593 64 526 485
YD-B330 RC2" 267.2  16.0  564.8  162 151 873 64 806 760
YD-B360 RC2-1/2" 317.3  19.0  670.7  162 151 873 64 806 760
YD-B405 RC2-1/2" 367.4  22.0  776.6  200 189 637 78 558 508
YD-B430 RC3" 467.6  28.0  988.4  200 189 637 78 558 508
YD-B620 RC3" 620.0  37.2  1313.6  200 189 892 78 815 762
Technical requirements Maximum operating pressure: 16 barg  Maximum operating temperature: 80°C  Minimum operating temperature:1.5°C
Pressure Barg 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Psig 15 29 44 59 73 87 100 116 131 145 160 174 189 203 219 232
Correction factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.23 1.31 1.36 1.41 1.46 1.51

 
Quality China Air Compressor Filter Supplier with Low Pressure DropQuality China Air Compressor Filter Supplier with Low Pressure Drop

Successful Case 
Quality China Air Compressor Filter Supplier with Low Pressure Drop
                                                                       
YUKA Delivery

Quality China Air Compressor Filter Supplier with Low Pressure Drop

YUKA service:
a. Providing professional consultation, technical support and special solutions
b. Providing timely feedback on complaints
c. Providing perfect after sales service and warranty

Q:Why choose us?
a. 24 years' practical experiences in R&D and manufacturing Compressed air treatment;
b. Founder of Compressed Air Nation Standard GB/T30475.1-2013 and GB/T30475.2-2013;
c. ISO 9001:2015, CE and product follow ISO8573-1;
d. With Germany Imported high efficiency filtration Test Instrument;
e.All goods had been 100% test before dispatched.
  
Frequently Asked Questions:
Q1. What kind of your company is it?
We're the manufacturer integrated with R&D, production and sales.
 
Q2. How about your technical conditions and production capability?
Complete process documents and equipment, mass production. 
 
Q3. What is the delivery time?
Delivery time depends on the order quantity, normally is 3-5 working days after 30% payment.
 
Q4. Do you have a warranty?
Yes, for filter, it is 1 year normally.
 
Q5. Can you supply customized product?
Yes, we have a professional technical team to provide you with the best solution and complete production processes and control to provide you with satisfied product.

 

Home> Products> Compressed Air Filter> Aluminum Air Filter> Quality Pneumatics Filter Air dryer Filter
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send