$2241-19 Piece/Pieces
$212≥20Piece/Pieces
| Payment Type: | T/T |
| Incoterm: | CIF,EXW,CFR,FOB |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Shanghai,Ningbo |
Model No.: WS100
Brand: YUKA
Separation Efficiency: 99%
Connection Size: Rc1-1/2"
Capacity: 10.0m³/Min
Maxi. Working Pressure: 1.0mpa
Compatibility: For All Kinds Of Air Compressor
Anti Corrosion Treatment: Internal & External
Pressure Drop: Can Be Ignored
Install Place: After Air Tank, Before Refrigerated Air Dryer
Housing Material: Aluminum Alloy
Housing Spanlife: 15 Years
| Selling Units | : | Piece/Pieces |
| Package Type | : | Box & Carton |
| Picture Example | : |
|
Why must the air supply system be treated?
The compressed air output from the air compressor contains a lot of harmful substances. If these impurities are not removed by proper methods, it will cause great harm to the air supply system: Deteriorated lubricating oil will deteriorate rubber, plastics, and sealing materials, block small holes, and cause valve action to fail.
Moisture and dust will cause rust and corrosion of metal parts and pipelines, cause blocking or wear of moving parts, and cause malfunction and air leakage of pneumatic components. Moisture and dust will also block the throttle orifice or filter: In cold areas, moisture will condense. Ice can cause the pipeline to freeze or crack.
Due to poor air quality, the reliability and service life of the pneumatic system are greatly reduced, and the resulting losses often greatly exceed the cost and maintenance cost of the air source treatment device. Therefore, the correct selection of the air source treatment system is absolutely necessary.
BENEFIT
* Air compressor water separator reduce moisture rusting of pipelines and damage to valves, cylinders, electronic components and other equipment;
* Protect the filter in front of the dryer and suction dryer
* Efficiently remove liquid in compressed air
* Improve air quality
FEATURE & ADVANTAGE
①99% Separation efficiency from compressed air system
②Zero pressure drop, saving energy and money
③Internal & external anti-corrosion treatment, increase spanlife and ensure separation efficiency
④With Strong structure, 15 years warranty, cost reasonable
TECHNICAL SPECIFICATION
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). For the application in other working pressure, please refer to the correction factors.
Model Pipe size Flow rates Dimension (mm) L/S m³/min scfm W(Width) D(Depth) H(Height) WS 15 RC1/2" 40.0 2.4 84.5 89 79 228 WS 25 RC3/4" 60.0 3.6 127.1 89 79 228 WS 50 RC1" 75.0 4.5 158.9 89 79 263 WS 75 RC1" 125.0 7.5 264.8 120 110 335 WS 100 RC1-1/2" 166.7 10.0 353.1 120 110 335 WS 200 RC2" 300.1 18.0 635.6 164 151 564 WS 250 RC2-1/2" 416.8 25.0 882.8 164 151 664 WS 700 RC2-1/2" 700.0 42.0 1483.1 200 189 712 WS 800 RC3" 833.5 50.0 1765.6 200 189 712 WS 800F DN80/DN100 833.5 50.0 1765.6 280 189 734/744 WS 1000F DN100/DN125 1000.2 60.0 2118.7 280 189 780/795 WS 1200F DN100/DN125 1166.7 70.0 2464.0 280 189 1058/1073 Technical requirements Maximum operating pressure: 10 barg Operating temperature:1.5~ 80°C
Pressure Barg 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Psig 15 29 44 59 73 87 100 116 131 145 160 174 189 203 219 232 Correction factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.23 1.31 1.36 1.41 1.46 1.51 
PARTS IN DETAIL
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now