Home> Products> Compressed Air Filter> Stainless Steel Air Filter> Stainless Steel Compressed Air Filter for Nitrogen Generator
Stainless Steel Compressed Air Filter for Nitrogen Generator
Stainless Steel Compressed Air Filter for Nitrogen Generator
Stainless Steel Compressed Air Filter for Nitrogen Generator

Stainless Steel Compressed Air Filter for Nitrogen Generator

$13951-19 Piece/Pieces

$1325≥20Piece/Pieces

Payment Type:L/C,T/T
Incoterm:FOB,CFR,EXW,CIF
Transportation:Ocean,Land,Air,Express
Port:Shenzhen,Shanghai ,Guangzhou
Product Attributes

BrandYUKA

OriginChina

TrademarkYuka

HS Code8421399090

Efficiency5um, 1um, 0.01um

TypeCartridge Filter

Transport PackageBrown Inner Box & Cardboard

Element Layer7

StructureCartridge

Acs Grade Serve Life2000-3000 Hours

Filter Efficiency99.99%

Element MaterialSodium Bosolicate Fiber Glass

CyclinderStainless Steel And Doule Support

Medium MaterialGlass Fiber

RemoveWater Mist& Oil Mist & Particles

Element ConnectionWith Tie-Rod Design

CertificatesIso9001-2015

Filtration Performance99.99%

Element Top Cap & End CapStainless Steel 304, 316, 316l Options

Filtration GradeUltra Filter

PF/AO/AA/AX/ACS Serve Life6000-8000 Hours

Dimension143*470 Mm

Flow Rate494cfm

Connection SizeRc2-1/2"

Packaging & Delivery
Selling Units : Piece/Pieces
Package Type : Carton Package
Picture Example :
Stainless Steel compressed air filter
Product Description

Most industrial compressed air applications operate at pressure 7bar, 10bar or 13bar, and purification equipment is usually designed around these working pressures. However, some application require higher working pressure, which will also lead to an increase in the concentration of pollutants.
 
G-BHL series stainless steel compressed Air Filters are designed to remove liquid aerosols, water, oil and sub-micron particles in the compressed air system. The filtration efficiency can be 99.99% to remove 0.01 micron particles and small droplets, improve the pass rate of the product, reduce maintenance time and costs, increase productivity and reduce production costs ultimately.

Technical Specification

The flow rate below is the treatment capacity of compressed air under rated working pressure 7 bar g (100psi g). For application in other working pressure, please refer to the correction factors.

Product Selection

Filter Element Performance

Air filter media activated carbon filter element air compressor element compressed air filter element
PF AO AA AX ACS AR AAR
As a primary filter, particles whose diameter more than 5μm can be removed, the maximum residual oil content is negligible. High efficiency general protection, dust particles, water mist and oil mist whose diameter more than 1μm can be removed, the residual content of oil mist does not exceed 0.6mg/m³(21ºC), 1ppm(w). High efficiency oil removal filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.01mg/m³(21ºC), 0.01ppm(w). Ultra-efficient filtration, dust particles, water mist and oil mist whose diameter more than 0.01μm can be removed, the residual content of oil mist does not exceed 0.001mg/m³(21ºC), 0.001ppm(w). Dust particles whose diameter more than 0.01μm, oil vapor and odor can be removed, the maximum residual residual content of oil vapor does not exceed 0.003mg/m³(21ºC), 0.003ppm(w). Dust particles whose diameter more than 1μm can be removed. Dust particles whose diameter more than 0.01μm can be removed.


Home> Products> Compressed Air Filter> Stainless Steel Air Filter> Stainless Steel Compressed Air Filter for Nitrogen Generator
Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send