$7431-19 Piece/Pieces
$705≥20Piece/Pieces
| Payment Type: | T/T |
| Incoterm: | CIF,EXW,CFR,FOB |
| Transportation: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Shanghai,Ningbo |
Model No.: WS700
Brand: YUKA
Separation Efficiency: 99%
Maxi. Working Pressure: 1.0mpa
Compatibility: For All Kinds Of Air Compressor
Anti Corrosion Treatment: Internal & External
Pressure Drop: Can Be Ignored
Install Place: After Air Tank, Before Refrigerated Air Dryer
Connection Size: Rc2-1/2"
Capacity: 42m³/Min
Housing Material: Aluminum Alloy
Housing Spanlife: 15 Years
| Selling Units | : | Piece/Pieces |
| Package Type | : | Box & Carton |
| Picture Example | : |
|
Water air separator play an important part for compressed air system
Remove of water in compressed air is the primary task of compressed air treatment. The liquid water entrained in compressed air will corrode pipelines, valves , instruments and equipment, resulting in increased production costs.
The compressed air water separator is compact and strength in appearance, durable, and the pressure loss is negligible. And there is an imported Automatic Drain Valve inside, no need to replace components. It is not only an ideal component for screw compressors, but also an indispensable water removel device for general air compressor post-processing.
Working Principle
The compressed air gas-water separator is composed of a housing, a cyclone separator, and sewage components. When the compressed air containing a large amount of oil and water solid impurities enters the separator, it spins down along its inner wall. The centrifugal effect produced causes the liquid water to separate out of the vapor stream and flow down the wall. Under the action of gravity, it flows into the separator. The bottom of the device is discharged by the Automatic Drain valve.
Feature & Benefit
①99% Separation efficiency from compressed air system
②Zero pressure drop, saving energy and money
③Internal & external anti-corrosion treatment, increase spanlife and ensure separation efficiency
④With Strong structure, 15 years warranty, cost reasonable
Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 barg (100psi g). For the application in other working pressure, please refer to the correction factors.
Model Pipe size Flow rates Dimension (mm) L/S m³/min scfm W(Width) D(Depth) H(Height) WS 15 RC1/2" 40.0 2.4 84.5 89 79 228 WS 25 RC3/4" 60.0 3.6 127.1 89 79 228 WS 50 RC1" 75.0 4.5 158.9 89 79 263 WS 75 RC1" 125.0 7.5 264.8 120 110 335 WS 100 RC1-1/2" 166.7 10.0 353.1 120 110 335 WS 200 RC2" 300.1 18.0 635.6 164 151 564 WS 250 RC2-1/2" 416.8 25.0 882.8 164 151 664 WS 700 RC2-1/2" 700.0 42.0 1483.1 200 189 712 WS 800 RC3" 833.5 50.0 1765.6 200 189 712 WS 800F DN80/DN100 833.5 50.0 1765.6 280 189 734/744 WS 1000F DN100/DN125 1000.2 60.0 2118.7 280 189 780/795 WS 1200F DN100/DN125 1166.7 70.0 2464.0 280 189 1058/1073 Technical requirements Maximum operating pressure: 10 barg Operating temperature:1.5~ 80°C
Pressure Barg 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Psig 15 29 44 59 73 87 100 116 131 145 160 174 189 203 219 232 Correction factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.23 1.31 1.36 1.41 1.46 1.51 
Product Parts
Success Case
Related Products List
Contact Us
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now