Air Filter Moisture Separator With Auto Drain WS15

Why need to install Air Filter Moisture Separator in your compressed air system?

The liquid water present in all compressed air systems causes pipeline corrosion, permanent damage to valves, cylinders, pneumatic tools and machinery, and reduces the efficiency of the after cooler/heat exchanger.
 

By installing the YUKA WS series of high-efficiency compressed water separators, more than 99% of the liquid water can be removed easily and economically.

Your compressed air system will reduce downtime and maintenance costs, so it will operate more efficiently. The WS high-efficiency water compressor separator will also improve the efficiency of downstream equipment such as after coolers, refrigeration dryers, filters, etc., delay the equipment life cycle and save costs.


Working principle

A large amount of water-containing steam enters the steam-water separator and moves downward in a centrifugal manner.The entrained water is separated due to the decrease in speed; the separated liquid flows through the trap and is discharged, and the dry and clean steam is discharged from the gas water separator outlet is discharged. 

Where Refrigerated Water Separator be installed among the compressed system?

The moisture separator is used in a compressed air system , located after the water-cooled chiller to separate moisture from the compressed and refrigerated air and after its exit, the air passes through an air dryer containing molecular sieve and activated alumina.

Feature & Benefit

A. High liquid removal efficiencies at all flow conditions
B. Protects coalescing filters from bulk liquid contamination.
C. Helps provide air quality in accordance with ISO 8573-1:2001 the international
standard for compressed air quality
D. Suitable for all compressed air applications
E. Suitable for all compressor types, including variable flow
F. Low pressure losses for low operational costs
G. Low lifetime costs
H. All FWS water separators are covered by a 15 year housing guarantee.

Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7 bar g (100psi g). For application in other working pressure, please refer to the correction factors.